Consider the following characteristic curve:
Develop a Simulink system that drives this characteristic curve with a sine wave signal and analyze the output signal. Experiment with various amplitudes of the sinusoidal input.
Consider the following “family of characteristic curves”:
Using the Lookup Table (2D) block design a Simulink system, which reads out the values at the points (x, x) with x ∈ [−1, 1] from the family of characteristic curves. In doing this, manipulate the family of characteristic curves with a suitably set From Workspace block. Compare the considerations involved in setting the characteristic family block Lookup Table (2D) with the three-dimensional plots in Section 1.2.5.